Company Information
Contact Us
Site Map

INLET FOGGING
Inlet Fogging Main
Swirl Jet Nozzle
Inlet System Sizing
Pump Skid
System Controls
P&ID Process and Instrumentation Diagram

 Inlet Fogging System Sizing
EXAMPLE: Moisture (GPM) required to lower inlet temperature from:
TempDB=110°F to TempWB=70°F with a

Turbine Air Flow=745,388 ft3/min

Formula: See Psychrometrics table below

GPM=  
(745,388 ft3/min)(64 grains/lb. of dry air)
(7000 grains/lb. of water)(13.75 ft3/lb. of dry air)(8.3lbs/gallon)


lbs. of moisture/hr required=59.7GPM or 60GPM

Phchrometrics Chart
Example continued on Pump Skid page.

ACTUAL SYSTEM SIZING IS DEFINED BY SITE - SPECIFIC CLIMATE CONDITIONS AND GAS TURBINE INLET FLOW


...
 

AMCO  10402 Rodney Street  P.O. Box 1066  Pineville, NC 28134
Phone: (704) 889-7281   Toll-free: (800) 948-5540   Fax: (704) 889-7270
| Home  |   Contact Us  |   Site Map  |   Company Information  |