Company Information
Contact Us
Site Map

INLET FOGGING
Inlet Fogging Main
Swirl Jet Nozzle
Inlet System Sizing
Pump Skid
System Controls
P&ID Process and Instrumentation Diagram

 System Controls
Control of the inlet coolers can be accomplished with one of three methods.
  • Personal computer
  • Programmable logic controller (PLC)
  • Direct programming into a plant digital control system (DCS)
A typical AMCO control system delivers precise cooling control with typical increments of 1°F with PLC logic managing multiple cooling zones.

Each zone consists of one or more nozzle manifold lines being opened. Optimum cooling is achieved with an algorithm that selects the needed flow stage of one or more zones.

The Control Panel View and Operator Interface Screens pictured below represent (2) of many screens available on the user-friendly operator interface panels to monitor system performance and perform system diagnostics.

Features
  • Advanced PLC logic manages multiple cooling zones
  • Typical cooling increments of 1°F
  • Maximum versatility to meet all inlet conditions
  • Complete instrumentation to monitor system operation and provide alarms and data feedback

Control Panel View
Spray Zone Flow Table

Operator Interface Screen
Operator Interface Screen

...
 

AMCO  10402 Rodney Street  P.O. Box 1066  Pineville, NC 28134
Phone: (704) 889-7281   Toll-free: (800) 948-5540   Fax: (704) 889-7270
| Home  |   Contact Us  |   Site Map  |   Company Information  |